The assortment of accessories offered by us has replenished with inter-unit cable, well-proven in the environment of advanced hi-fi / Hi-End audio enthusiasts. Structurally it can be represented as a silver-plated twisted pair with Teflon insulation, enclosed in a silvered screen. The cable has an orientation, the reason for this is due to its design, that is, physical laws. A wiring scheme is used, when the screen is not a signal conductor and is grounded at only one point, this scheme provides the best shielding and noise immunity over a wide frequency range.
RCA Cable Silver Twist (DA SIC RCA / 01)
Why is silver in the cable?
The silver coating of the cores of our “interblock” provides the smallest resistance, insignificant attenuation, high speed of signal transmission, which allows us to pass through the whole spectrum of analog sound stream without losses, as a result – the formation of a dynamic and real sound picture without distortion in the audio path of any price category.
Production Process
Each twisted pair consists of two stranded silver-plated wires made of high purity copper. Teflon as a dielectric (insulation) sharply reduces the capacitance (about 13 pF / m) and the impedance of the cable, ensuring the most insignificant losses, especially at high frequencies. Compact and quality brass connectors type RCA from “AEC connectors”, ensure tight contact without the risk of “breaking” the nests of your equipment.
Directivity matters!
We use a wiring scheme in which the screen is not a signal conductor and is grounded only at one point, which in combination with a dense silvered braid and special “drain” wires provides the best shielding (protection from electromagnetic fields and radio interference). To realize the advantages of this scheme, the direction indicated on the cable should be observed.
The cable is packed in a velvet bag with embroidery and a cardboard box. The price is indicated for one set (stereopair) of 1 meter long each.